SMART CUM PROJECTION
SMART CUM PROJECTION
DN SERIES SPOT WELDING MACHINE
| KEY TECHNICAL SPECIFICATION | ||||||
|---|---|---|---|---|---|---|
| MODEL | Voltage | Phase | Input Power Capacity(KVA) | Primary Current(A) | Duty Cycle(%) | Open - Circuit Voltage(V) |
| DN - 10 | 380/50 | 2 | 10 | 26.3 | 10 | 1.55 - 2.4 |
| DN - 16 | 380/50 | 2 | 16 | 42.1 | 10 | 1.93 - 3.01 |
| DN - 25 | 380/50 | 2 | 25 | 66 | 10 | 2.4 - 4.15 |
| DN - 35 | 380/50 | 2 | 35 | 92 | 10 | 2.6 - 4.2 |
| MODEL | Adjustable Step No | Weld Time Adjust(S) | Arm Extension (mm) | Welding Thickness (mm) | Cooling Method | Weight (KG) |
|---|---|---|---|---|---|---|
| DN - 10 | 4 | 0 - 9.99 | 200 | 1.5 + 1.5 | Main Transformer: Air Cooling | 80 |
| DN - 16 | 4 | 0 - 9.99 | 200 | 2 + 2 | 90 | |
| DN - 25 | 4 | 0 - 9.99 | 280 | 2.5 + 2.5 | Electrode: Water Cooling | 100 |
| DN - 35 | 4 | 0 - 9.99 | 280 | 3.5 + 3.5 | 110 |
DTN SERIES PNEUMATIC SPOT CUM PROJECTION WELDING MACHINE
| KEY TECHNICAL SPECIFICATION | |||||||
|---|---|---|---|---|---|---|---|
| MODEL | Voltage(V/Hz) | Input Power Capacity(KVA) | Input Current (A) | Duty Cycle(%) | Secondary open-circuit Voltage(V) | Electrode Arm Extension Length (mm) | Horn Spacing (mm) |
| DTN - 25 | 380/50 | 25 | 66 | 20 | 2 - 4.13 | 400 | 200 |
| DTN - 40 | 380/50 | 40 | 105 | 20 | 2.5 - 5 | 400 | 200 |
| DTN - 50 | 380/50 | 50 | 131 | 15 | 2.5 - 5 | 450 | 200 |
| DTN - 63 | 380/50 | 63 | 168 | 20 | 2.07 - 5.51 | 450 | 220 |
| DTN - 80 | 380/50 | 80 | 210 | 20 | 3.52 - 7.04 | 450 | 220 |
| DTN - 100 | 380/50 | 100 | 263 | 20 | 3.66 - 7.32 | 480 | 250 |
| DTN - 125 | 380/50 | 125 | 332 | 20 | 4.32 - 8.64 | 480 | 250 |
| DTN - 160 | 380/50 | 160 | 421 | 20 | 4.44 - 9.03 | 500 | 300 |
| DTN - 200 | 380/50 | 200 | 526 | 20 | 6.01 - 9.5 | 500 | 300 |
| DTN - 300 | 380/50 | 300 | 789 | 20 | 12.7 - 13.6 | 500 | 300 |
| MODEL | Upper Electrode Working Stroke(mm) | Max Pressure Among Upper electrode (N) | Welding Thickness (Low Carbon Steel) (mm) | Pressure of Condensed Air(Mpa) | Water Flow (L/h) | Weight (KG) | Dimensions (mm) |
|---|---|---|---|---|---|---|---|
| DTN - 25 | 100 | 2450 | 2.5 + 2.5 | 0.6 | 120 | 102 | 885 x 490 x 1545 |
| DTN - 40 | 100 | 2450 | 3 + 3 | 0.6 | 120 | 194 | 885 x 490 x 1545 |
| DTN - 50 | 100 | 2450 | 3 + 3 | 0.6 | 120 | 194 | 885 x 490 x 1545 |
| DTN - 63 | 100 | 3800 | 3.5 + 3.5 | 0.6 | 180 | 265 | 1020 x 580 x 1620 |
| DTN - 80 | 100 | 3800 | 4 + 4 | 0.6 | 180 | 280 | 1020 x 580 x 1620 |
| DTN - 100 | 100 | 5500 | 5 + 5 | 0.6 | 300 | 350 | 1100 x 580 x 1780 |
| DTN - 125 | 100 | 5500 | 5 + 5 | 0.6 | 480 | 380 | 1100 x 580 x 1780 |
| DTN - 160 | 100 | 9700 | 6.5 + 6.5 | 0.6 | 480 | 535 | 1120 x 620 x 1880 |
| DTN - 200 | 100 | 9700 | 7.0 + 7.0 | 0.6 | 780 | 600 | 1120 x 620 x 1880 |
| DTN - 300 | 100 | 18700 | 8.0 + 8.0 | 0.6 | 950 | 626 | 1310 x 680 x 2060 |